20141229

Six things I've learned about 3D printing

1. 3D printing saves lots of time (even if printing seems slow)

In those dark days before 3D printing, when I needed a custom set of vise jaws for my milling machine, producing them was a non-trivial process.  Either I needed to keep some blanks on the shelf, or I'd have to make them from scratch.  To do so, I'd have to: Find some material, remove any setups already on the machine, indicate all the straight edges, square up the stock, accurately drill and counterbore the holes, and THEN I can finally worry about producing the functional shape of the jaws.



Today, it's only a little bit of effort with some CAD tools to model up the same set of vise jaws.  The benefits of digital fabrication are manifold: not only do we have the exact shape in an easily duplicated digital format, but we can easily create iterations and derived models, small little tweaks, just as quickly (or all of them as a batch).  You also know that the parts from the 3D printer will come out true, flat, straight, and dimensionally accurate.  What's more, producing said shape no longer requires the devoted attention of an artisan - anyone can produce almost any complex shape, printing overnight and unattended.  That frees up the machine shop (and the machinist) to do what they do best, instead of your best employees toiling away to produce these trivial, but troublesome shapes that we seem to need all the time. 

Added benefit - when relying on digital designs, you never have to backstock parts, you can simply print them as needed, using a Just-In-Time or Kanban system. 
 
2.  Iteration is trivially easy


Using 3D printers in combination with your existing set of tools gives you a higher, augmented level of versatility to solve problems.  I had to mate up a bolt pattern for a motor bracket, but didn't have a quick way to measure the spacing between holes.  Using some clever CAD trickery, I was able to take a picture of the hole pattern and make an estimation of the size, so I could print out a gasket (rather than the whole part).  The first iteration wasn't quite right, it needed some adjustment before printing out the final bracket.  Also note the 3d printed shaft coupler with the square internal broachway, a very challenging shape to produce with otherwise limited tooling.





Utilizing the power of digital fabrication and modern, innovative tools, we can quickly go through several design changes, even over the weekend when most of the manufacturing staff has gone home. 

3. It's an indispensable tool for (Reverse) Engineering

Not quite sure how big your widget needs to be?  Use your printer to find out, before you go through the trouble of making part from metal.  In this case, I had to guess what the size of the T slot nuts needed to be, and I used the 3d printer to double-check my dimensions.  Everything mated up, except the wide part of the base, which was about .010" too tall, due to a troublesome measurement.  After gently lapping the bottom of the nut, it was a perfect fit, which we then used to produce the nut from metal.  Use lessons 1 and 2 to your advantage, while you're at it.  Also notice the orientation of the part - that was crucial in regards to proper dimensioning.  My FDM machine prints with an accuracy of +/- .002" along the X and Y axis, and perfectly accurate along the Z axis, although in .010" or .013" layer thicknesses.  In other words, I had to consider printed part orientation for optimal printer resolution and tolerancing. 




4. The 3D printer industry needs a "killer app"

How do we make 3D printers useful to everyone?

I know how these tools are useful to me, but manufacturing is kind of my bag.  I have 3D CAD skills, machine shop skills, and a workshop that requires said skills from time to time.  I can't begin to tell you how many times producing a little 3D printed trinket has turned a project completely around.  It seems the problem lies in that intimate-enough knowledge of the extensive tool chain can be troublesome: between multiple pieces of software (CAD and Slicers), and multiple pieces of hardware (3D printer and a whole machine shop).  Most of those tools and skills are simply not within reach of most people, especially as a stack.  When I need a quick little doo-dad to hold a switch on a machine, no problem.  Typically, most people using 3D printers are stuck printing Yoda heads downloaded from Thingiverse.



I always like to compare 3D printer technology to how computers must have been in the mid 70s.  You either have these tremendous industrial boxes that only large businesses can afford, or you have these hobbyist toys built at home by geeks, programmed in Assembly language by flipping switches.  However, the gap between the two is rapidly closing, blindly stampeding toward ubiquity.  What was it that brought computers out of the nerd's garages and into the mainstream?  I'd say it was the word processor.  Once the average joe discovered that typing documents electronically was far superior to even the most sophisticated typewriter, there was no more denying the awesome power of the microchip.  In the 30 years since then, computers are so ubiquitous that we're often relying on many different interconnected computers with many millions or billions of transistors, EACH, some of which live in our pocket, so disposable that soon smartphones will be appearing as the prize in our breakfast cereal. 

It's difficult to predict how 3D printing technology will change our lives in the coming years and decades, but it almost goes without saying that this is only the beginning.  3D printing has been around for roughly 30 years now, and it took about that long for the microchip to become a mainstay in everyone's home. 

5. 3D printed guns are NOT the "killer app"

In fact, they outright stink.



People have been engineering firearms for hundreds of years, and many competent people have lost life and limb in that pursuit.  We've all seen enough Elmer Fudd cartoons to know what happens to malfunctioning firearms.  Also a few things worthy of note:

3D printed firearms are generally a novel legal situation, lacking any real legal precedent.  I'd hate to be the guy who goes through the wringer while the lawmakers use my case as a guinea pig to develop case law. 

As far as the BATF is concerned, the distinction between a pistol / rifle barrel and a short-barreled shotgun (read: VERY BAD) is rifling, or lack thereof.  Have you looked down your 3d printed barrel to see any discernible rifling?  These machines are good, but not THAT good. 

Do yourself a favor: save yourself the time, the trouble, and the plastic, and avoid this one.

6. Let it go (figuratively speaking)

In the old days of making a part, I would have spent many hours of my dedicated focus and attention to producing a specific shape.  What would stink is that after all that time, the part doesn't fit, or the new guy on first shift breaks it, or the designer changes it enough to warrant making a new one.  We've all been there, and it's a very frustrating position to be in.  All that effort, down the tubes.  Kinda makes you want to scream, sometimes.






When you make parts on the 3d printer, and the new guy immediately drops it on the floor, don't get mad, don't take it personally.  Take a deep breath, take a moment to consider your predicament, then calmly hit the start button on your printer one more time. 

All you have to do at this point is wait for the next print to finish. 

30 comments:

  1. A fine article. It's good to see an article about this industry from the perspective of someone in manufacturing.

    ReplyDelete
  2. If you are in advertising, graphic designing or in any other type of business where the product or service has a visual culmination, a business printing service benefits you greatly through the printing of brochures. 55 printed

    ReplyDelete
  3. While deciding on paper quality for business cards printing, one will do well to select paper quality that is reasonably good and does not cost much. See it here

    ReplyDelete
  4. Customisable blurbs - With present day innovation, printing occupations wind up noticeably less demanding and more adaptable. How to Mail a Postcard Cheap

    ReplyDelete
  5. Think of it this way. Your computer speaks English and your printer speaks a forgotten language that hales from the deep jungle where no person other than the native speaks the language. Well... that may be a little extreme, but I harbor ill feelings toward printers.Cheap Yard Signs printing Austin Texas

    ReplyDelete
  6. Exceptionally useful post ! There is a great deal of data here that can enable any business to begin with an effective interpersonal interaction battle !
    Cheapest Printing Services Near Me

    ReplyDelete
  7. This comment has been removed by the author.

    ReplyDelete
  8. This is such a great post. It was really informative as well as on to the point and I am glad that I have found it. valve foundry

    ReplyDelete
  9. Im taking your bolster additionally, Thanks.
    Nordstrom Coupon

    ReplyDelete
  10. It's an excellent dominant source which you are offering, and also you Just provide away it free!! I love detecting websites of that are attentive to the specific real estate value offering you fantastic learning resource for absolutely no cost. We sincerely enjoyed examining this page. Be grateful! 123 hp dj3630

    ReplyDelete
  11. most significantly, three-D printers have enjoyed a enormous fee decrease over the last numerous years. A handful of groups and companies have led the fee, developing finely tuned “computer” variations of the previously commercial-sized machines. those corporations have in large part made 3-d printers affordable and practical for customers – consumers who keep to discover innovative & valuable makes use of for 3-D printing today, while this emerging generation continues to evolve. cheap postcards printing

    ReplyDelete
  12. How much of an exciting piece of writing, continue creating companion esigns vinyl banners

    ReplyDelete
  13. Hello, I have browsed most of your posts. This post is probably where I got the most useful information for my research. Thanks for posting, maybe we can see more on this. Are you aware of any other websites on this subject. gaps singapore gifts for companies

    ReplyDelete
  14. Thanks for posting this info. I just want to let you know that I just check out your site and I find it very interesting and informative. I can't wait to read lots of your posts. postcards printing

    ReplyDelete
  15. Utterly composed subject material , thanks for selective information . converting drawings

    ReplyDelete
  16. very nice post, i definitely really like this site, persist in it Imprentas en Cancun

    ReplyDelete
  17. I’m just commenting to let you know what a excellent discovery my cousin’s girl encountered going through your web site. She noticed several details, which include how it is like to possess an ideal coaching spirit to let others smoothly learn a number of grueling subject areas. You actually did more than visitors’ desires. Thank you for distributing these great, dependable, informative and unique tips on that topic to Tanya. https://bandanasupply.com/

    ReplyDelete
  18. I found that site very usefull and this survey is very cirious, I ' ve never seen a blog that demand a survey for this actions, very curious... Letter Printing

    ReplyDelete
  19. He still has the gleam of a villain in his eyes, but he has enough power and gravitas in his performance, especially when we can easily compare him to the original and legendary Spock (credited as “Spock Prime” in the end credits), that it is obvious he was born to fill the shoes.

    ReplyDelete
  20. There are a couple of interesting points over time here but I do not determine if these people center to heart. You can find some validity but I most certainly will take hold opinion until I take a look at it further. Excellent article , thanks therefore we want far more! Combined with FeedBurner also 3d printing jakarta

    ReplyDelete
  21. There are so many people who can be benefited from a 3D laser scanner such as contractors, engineers, developer, and more. So the demand for 3D laser scanner is increasing day by day. If you need the best 3D laser scanning service in Calgary, Alberta then you can visit Onsite3D website. 3D scanning service Grand Prairie, Alberta

    ReplyDelete
  22. A debt of gratitude is in order for the decent blog. It was extremely valuable for me. I'm glad I discovered this blog.
    yeast infection no more review

    ReplyDelete
  23. This is a excellent blog, would you be involved in doing an interview about just how you designed it? If so e-mail me! https://royalcbd.com/product/cbd-salve/

    ReplyDelete
  24. Nice article. It's good to see an article about this industry from the perspective of someone in manufacturing.
    Buat ayah & bunda yuk cari referensi nama anak sekarang

    ReplyDelete
  25. This type of message always inspiring and I prefer to read quality content, so happy to find good place to many here in the post, the writing is just great, thanks for the post. Print In London

    ReplyDelete
  26. Thank you for posting this inspiring and knowledgeable information. I gather a lot of information from this post. Printpal London

    ReplyDelete
  27. A new small business used most of its marketing budget getting a mailer professionally printed renting impresoras mallorca

    ReplyDelete
  28. This comment has been removed by the author.

    ReplyDelete